Weld-On Hubs are available in 3 styles to match the user’s preference for bushing installation types. They are stocked for make use of with:
TB Bushings
QD Bushings
DST Bushings
All MasterDrive Weld-On Hubs are machined from metal.
Weld-On Hubs are commonly used with plate type sprockets and conveyor pulleys to provide for even more shaft engagement.
Are 
manufactured to simply accept Taper Lock Bushings. Two models can be found. Type S and Type W. Type S provides for a shorter length through the bore, and Type W a more defined registration flange to aid with positioning and concentricity for welding.
Are manufactured to accept a QD style flanged bushing.
Accepts DST-Dual Split Taper style bushings.
These bushings are keyed to both the shaft and hub. The exterior key provides positive travel with no torque on the cap screws. DST bushings enable the highest torque carrying capability.
The nitro weld on hubs are bored to size hubs that can be used with weld on sprockets, pulleys and even custom applications. Our hubs will be an “X series” hub, this means they’re appropriate for any “x series” sprockets or pulleys. Sprocket X hubs can be found in finished bore, sq . bore, hex bore, idler and splined bore. Bore sizes range between 1/2″ ID up to 1-1/2″ ID. The Nitro weld on hubs are made from 1045 CD (frosty drawn) steel and completed with a black oxide coating.
Weld-On Hubs are constructed with steel, drilled, tapped and taper bored to receive Tapered
Bushings. They are very beneficial for welding into pulleys, plate sprockets, impellers,
agitators and many other devices which should be firmly fastened to the shaft.
Weld-upon hubs are made from 1015-1025 steel, drilled, tapped and taperbored to get the taper-lock bushing. They are of help for welding into enthusiast rotors, pulleys, plate sprockets, etc., which must be firmly attached onto shafting. Four types of hubs can be found from stock.
Weld-on hubs are constructed with low carbon steel for good welding compatibility. They are useful for welding into fan rotors, impellers, agitators, etc., which require secure mounting to the shaft. A standard type comes in addition to one that is specifically designed for use in the end disc of a conveyor pulley.
Type S Taper-lock – actually created for use in scaled-down sprockets, now suitable for a great many other lighter-duty applications
Type W/WA Taper-lock – rugged, full-duration size for single-hub, heavy-duty applications
Type F – features a bigger flange diameter that can be welded into standard metal tubing to fabricate conveyor pulleys or perhaps process rolls
Type K – smaller sized design and style, especially useful for two-hub engineering, such as for example conveyor pulleys Taper-lock bushings
Both are made of steel materials with rugged, compact designs to accommodate most bushings sizes.
Ever-Power is a trusted distributor of precision weld-on hubs. Weld-on hubs can be utilised for welding to create “B” or “C” design sprockets and for other applications. Particular dimensional hubs are available per your specifications on a made-to-purchase basis.
Manufactured from Metal to provide a convenient methods to secure supporter rotors. Steel pulleys, platewheel sprockets, impellers etc. to a shaft. The Shouldered outer diameter permits easy site. Taper bored to match taper lock bush sizes 1210-5050.
Chain & Drives share the complete selection of Weld-On Hubs to complement our coupling, pulley and sprockets stock in a nutshell reach and very long reach models. They might be applied in assisting the use of taper fit bushes to melt your tools to a influenced shaft.
Taperfit or perhaps QD weld-on hubs are for use in the fabrication of conveyor pulleys, plate sprockets, enthusiasts and impellers. Weld-on hubs are constructed of low carbon steel for good welding compatibility.
Weld-on hubs are made of 1015-1025 steel, drilled, tapped and taperbored to receive the Taperfit bushing. They are useful for welding into lover rotors, pulleys, plate sprockets, and must be firmly installed onto shafting. Four types of hubs are available.
Weld on hubs can be purchased in many different variations such as: stock bore, finish bore, Q-bushed, taper-bushed, and BM-bushed. These hubs are made from bar steel and utilized for welding to produce “B” style sprockets that include share bore, finished bore, and also styles of bushed sprockets. Special hub dimensions are available per your requirements on a made-to-purchase basis.
