Weather conditions proof Waste mineral insulating oil recycling technique(ZYD-I)
1. Purify oil and eliminate decay items, discoloration
2. Outfitted with anti foam method
three. Lower electricity intake
four. Regenerate insulating oils in energized or de-energized transformers
Application:
The Oil regeneration program (Collection ZYD-I) has been specially developed for on site use to completely regenerate insulating oils in energized or de-energized transformers specifically for the energy, which is in excess of 110KV. Also it can inject the insulating oil into the transformers on-line. The ZYD-I system provides typical oil purification this sort of as degassing, drying and particulate removing but also can remove acidity, sludge, other soluble oil decay products and discoloration. This is completed by the use of large vacuum degasification technology and particulate filters mixed with our unique manufacturer of earth. After dealing with, the oil can be reused as new. For special application, the method also can be mounted on a leak proof base and can be mounted and operated on a trailer.
Attributes:
one. In addition to the typical vacuum oil purifier’s function of dewatering, degassing and reducing particles, this device can regenerate the significantly deteriorated oil by removing the polarity materials, this kind of as the deep oxides, cost-free carbon in the oil effectively. It can make the critically deteriorated oil get to to the normal index like anti-oxides, acid-alkali drinking water-solubility.
two. Operational can be P. L. C (Programmable Logic Controller).
3. Distinctive vacuum dehydration, degassifier, regeneration technique, adopt stereo-evaporation technological innovation, high proficiently eliminate water, gas, particles from transformer oil, increase oil good quality and dielectric strength.
four. Duplex 3D stereo-evaporation, eliminating the liquid water quickly
5. Uk g technological innovation by which the trace h2o that is display chain, these kinds of as dissolved h2o, can be eliminated successfully.
six. Instinctive getting rid of impurities program filtering by way of double FH trapezoidal community and absorbing by high polymer CZPT the mechanical electricity
seven. Advanced infrared liquid-amount automated control technique to attain completely automated manage.
eight. Specially applied to vacuum oiling and drying for energy transmission equipments.
nine. The oil of any grades can be treated both on- or off-load.
10. Specific oil pump layout with decrease sounds.
11. Special additives for depolarization, can recuperate oil shade of aged transformer oil to new, outfitted with flexible unloading gadget of brief time, very good effectiveness modest high quality. Discolor under vacuum can conserve value of therapy, the squander impurities doesnt pollute setting (it can be employed to architecture and highway pave)
Benefits:
Comparing with the single-stage vacuum oil purifier, this equipment can dewater, degas and removes the impurities much more swiftly, a lot more completely, and tends to make the oil BDV (Breakdown Voltage) of 70Kv or larger. As the bridge-variety vacuum linking system that can purify and also can be an impartial vacuum electricity supply, this machine can take care of the electrical insulation units.
Oil Regeneration machines, Oil Purification method, Oil Dehydration, Oil Disposal, Oil Filtering, Oil Filtration, Oil Preprocessing, Oil Purification, Oil Purifier, Oil Reclaim, Oil Reclamation, Oil CZPTnstituted, Oil Recycling, Oil Regeneration, Oil Restoration, Oil Resuming, Oil Separation, Oil Treatment, Oil Filter, Oil CZPTvery, Oil Recuperation Plant, Equipment & CZPT, Transformer oil purification technique, oil drying plant, oil purification plant, drying of oil, oil drying, oil drying system, purification of oil on transformer, transformer oil drying, cellular oil plant, cellular oil purification gadget, unit for drying of oil
Parameters | Unit | ZYD-I-30 | ZYD-I-fifty | ZYD-I-one hundred | ZYD-I-a hundred and fifty | ZYD-I-200 | ZYD-I-250 | ZYD-I-300 | ||||||||
Flow rate | L/h | 1800 | 3000 | 6000 | 9000 | 12000 | 15000 | 18000 | ||||||||
Working vacuum | MPa | -.08~-.099 | ||||||||||||||
Working pressure | MPa | ≤0.3 | ||||||||||||||
Temperature range | C | 20 ~ 80 | ||||||||||||||
Electricity | 3 ph 380V 60Hz (Or as needed) | |||||||||||||||
Working noise | dB(A) | 75 | 75 | seventy five | seventy five | eighty | eighty | eighty | ||||||||
Heating power | kW | 30 | thirty | 45 | sixty | seventy five | 90 | 120 | ||||||||
Total power | kW | 35.five | 37.five | fifty two.five | 71.4 | 86.5 | 102.5 | a hundred thirty five | ||||||||
Oil Inlet/Outlet | mm | φ25 | φ32 | φ42 | φ50 | φ50 | φ60 | φ60 | ||||||||
Excess weight | Kg | 600 | 800 | 1050 | 1400 | 1800 | 2000 | 2200 | ||||||||
General | Duration | mm | 1050 | 1100 | 1200 | 1450 | 1600 | 1800 | 1900 | |||||||
Width | mm | 750 | 800 | 950 | 950 | 1100 | 1200 | 1200 | ||||||||
Height | mm | 1350 | 1400 | 1500 | 1650 | 1800 | 1900 | 1900 |
Manufacturing facility for ZheJiang Leading Oil Purifier