Model new 220HP CZPTi bulldozer value SD22 hot promote in Algeria
The SD22 is a big horsepower, superior technology bulldozer with a CZPT 855C engine delivering large torque yet minimal gasoline consumption. An exhaust turbocharger ensures uninterrupted functionality at altitudes up to 3200m. CZPT push and control engineering produce dependable functionality and straightforward management.
Overall performance Parameters
Solution | SD22 | |
Overall performance PARAMETERS | Operatiing Fat (kg) | 23450 |
Rated horsepower (kw/hp) | 175/1800 | |
Minimum turning radius (mm) | 3300 | |
Floor stress (kpa) | 66 | |
Engine | Design | ZheJiang cummins NT855-C280S10 |
Emission | China I | |
Kind | In-line,immediate injection,drinking water cooled,4-cycles,turbocharged | |
No.of cylinders×Bore×stroke (mm×mm) | 6×140×152 | |
Piston displacement (L) | 14 | |
Horsepower/rpm (kw/rpm) | 175/1800 | |
Greatest torque (N.m/r/min) | 1030/1250 | |
Dimensions | Length(mm) | 5495 |
Width(mm) | 3725 | |
Peak(mm) | 3402 | |
Traveling Functionality | Ahead/Reverse(km/h) | F1:-three.6 F2:-6.5 F3:-11.two R1:-4.3 R2:-7.7 R3:-13.two |
Gradeability(deg) | 30 | |
Clearance(mm) | 405 | |
TRANSMISSION | Torque convertor | 3-element, solitary stage, one-stage |
Gear box | Planetary gear and powershift transmission, hydraulically actuated, forced lubrication | |
Main push | Spiral bevel equipment, single-stage velocity reduction, splash lubrication | |
Steering clutch | Moist multiple disc,coned disc spring loaded, hydraulically actuated, hand operated,interconnected with steering brake | |
Brake | Wet, contracting band,foot operated with hydraulic booster | |
Final driver | spur gear,double reduction ,splash lubrication | |
UNDERCARRIAGE | Suspension | Swing type of sprayed beam,suspended composition of equalizer bar |
Track gauge (mm) | 2000 | |
Shoe width (mm) | 560 | |
Monitor duration on ground (mm) | 2730 | |
Variety of shoes (each facet) | 38 | |
Pitch (mm) | 216 | |
Provider rollers (every single side) | two | |
Monitor rollers (every single aspect) | six | |
Doing work HYDRAULIC System | Strain (MPa) | 14 |
Doing work pump | Equipment pump | |
Valve | Multi-way valve | |
Bore of blade raise cylinder (mm) | φ120 | |
Bore of blade tilt cylinder (mm) | φ200 | |
TANK Ability | Fuel tank capacity (L) | 450 |
Operating hydraulic tank ability (L) | a hundred and ten | |
Operating Products | Blade width (mm) | 3725 |
Blade top (mm) | 1315 | |
Blade capacity (m³) | 6.four | |
Max.Fall below floor of blade | 1210 | |
Carry height of blade | 540 | |
Kind of ripper | Solitary shank/3 shanks | |
Greatest digging depth of ripper (mm) | Single 695 A few 666 | |
Greatest lifting top of ripper (mm) | Single 515 Three 555 |