Offset Sidebar Welded Steel Chains
Welded Steel Mill and Drag Chains
W Series Welded Steel Mill Chain
WH Series Welded Steel Mill Chain
WD Series Welded Steel Drag Chain
WD welede metal chain c/w heat taken care of rivets
WH welded metal chain-totally heat handled
WHIBR fully heat handled plus even more induction hardened barrels&rivets
WHIBRS very same as IBR in addition sidebar dress in surfaces
WD welded steel drag chain
XHD added large responsibility
CS solid metal barrel
Welded metal drag chain is developed according to ISO 6971 and ANSI B29.18M. Merchandise provide effective and inexpensive provider when employed in chip and sawdust conveyors, and like applications. Reverse barrel is CZPT. Attachments includes C1, C3, C4, RR and Wing.
With their big wide pushing region, welded metal drag chains supply sizeable carrying capacity when operated at moderate speeds. They can be run in the same troughs and on the exact same sprockets as their solid chain counterparts.
Welded Steel Mill Chain includes offset sidebar welded steel mill chain(or cranked hyperlink welded steel mill chain), straight sidebar welded metal mill chain and welded stainless metal mill chain as for each ISO 6972 and ANSI B29.16M. These functional welded steel chains are employed during the forest goods industry and paper processing industries as economical substitute for comparable cast chains. Manufactured with the most superior tactics, tools and high top quality steels, these chains supply enhanced resistance to dress in and shock loads for a wide assortment of applications of conveying, transmission and elevations. A range of attachments are also CZPT for diverse conveyor and elevator purposes: A1, A2, A22, F2, F4, H1, H2, K1, K2, R1, RR1, R2, R22, W1.
Welded steel mill chains are recommended for most conveying, driving, and elevating apps in which a higher-strength steel rollerless chain is needed. These chains will work on the same sprockets as their forged chain counterparts.
The route of vacation for welded Mill Chain is determined by the software. If utilised in a conveyor application, the direction should be with the open up stop first. If employed as a push chain, the shut stop, or the stop with the barrel, should be very first.
Chain No. WR-seventy eight/WR-seventy eight-four/WR-82/WR-124/WR-111/WR-106/WR-132/WR-150/
WR-a hundred and fifty five/WR-157/WR-159/WR-two hundred/
WH-seventy eight/WH-82/WH-124/WH-111/WH-132/WH-a hundred and fifty/WH-one hundred fifty five/WH-157/WH-159/WH-two hundred
|WD Sequence welded metal mill and drag chains
|We 24 hours service for you!