Laser cutting air compressor

9.Motor maintenance.
Based on the motor instructions for maintenance.

8. drive belt.
To adjust the degree of tightness every 2000 hours, every 4000 hours to check on the wear and tear, according to deterioration decide whether or not to replace.

7, safety valve.
Every 4000 hours to check if the action is sensitive.

6.Pressure valve.
Clean every 4000 hours, and check if the opening pressure is normal.

because for oil-surroundings compressors, the oil-drinking water separator function: separates the oil from the moisture in the atmosphere and therefore accumulates over a long period of time and can affect the filtration efficiency without the need to replace or clean the oil-water separator

5, coal and oil separator.
Every 4000 hours need to replaced a fresh piece.

Otherwise the oil will make a impact of the cutting effect

4.oil filter.
Every 2000 hours to Air Compressor For Tire Production Equipment displace a new piece.

Every 1000 hours need check oil content however it need to replace the brand new oil after 4000 hours