hydraulic planetary drive

Single and dual reduction planetary gear drives to be used with electric, hydraulic, air flow motors or mechanical power insight from high acceleration, low torque sources to deliver reduced speeds at increased torques. The input aspect has standard SAE pads for electric motor mounting. Available in the three output configurations demonstrated below. Many units could be furnished with an intrinsic parking brake.
Single reduction drives are limited to 3500 RPM input; double reduction drives to 5000 RPM. Units with essential parking input speed is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque ratings are intermittent. For continuous operation reduce torque rankings to about 1/3 to 1/2 the values shown. Devices provide 95% power transmitting efficiency.

Wheel Drive
Input side has standard SAE pads and splined input. Output side has hub for mounting vehicle wheel. Free wheel can be done by using the springtime disconnect to disengage the drive shaft. The disengage feature is standard on all wheel drives.

Shaft Output
Input side standard SAE pads with splined input. Output side choices include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is standard SAE pads with splined input. Output side includes a hydraulic planetary drive flanged spindle for coupling to the load.

Swing Drives
Ever-Power model 6 emerges with or without essential parking brakes. The “SW” Power Wheel has extra-large tapered roller bearings, a ductile iron hub and heat treated ring equipment to reduce backlash growth due to wear. The exterior bearing nut supplies the best in shaft retention and shaft strength. Output could be a spindle shaft or various sizes of essential pinion gears.