Please note:
Always wear eye security.
When fitting the mandrel in the collet, leave 15mm of mandrel from the collet to the mounted bit for ultimate performance.
Flexible shafts replace rigid shafts, eliminating alignment problems and efficiency losses. They also allow better freedom of design and are lighter in weight than universal joints, gears, pulleys or chain drives with lower set up costs.
Abrasive attachments can be utilized with this Adaptable Drive Shaft (usually do not exceed Ø100mm for managed usage)
Wheels: Brass, Bristle, Bufflex, Cotton, De-oxidization, Sensed, Satin Fibril, Steel, Wool
Mops: Cotton End, Loose Fold, Dolly, Stitched
If you find the Flexible Drive Shaft too large for a few applications watch rotary drills for finer work.
Using a flexible drive allows you to take your saw to the most inaccessible places just some of the attachments can be used below. Polishing, grinding, drilling, texturing, smoothing, reducing are only a few of the many responsibilities the Faithful Flexible Drive Shaft can be utilized for.
A keyless chuck makes changing bits easy and the plastic hand grip offers a firm hold making the shaft simple to guide when in use.
With this flexible drive shafts, the torque is transmitted nearly exclusively via vulcanized cord inlays because of the tension-force-theory. The patented Tenpu fiber technology ensures excessive ability density, elasticity and good damping habit. Load peaks and vibrations as a result have significantly less of an impact on the aggregates in the powertrain, which benefits their service life.
The Faithful Flexible Drive Shaft will fit straight into the chuck of any cordless or energy drill. The reinforced ends and anti-kink styles prevent use and helps give a long working life.
