electric fan motor

Fan electric fan motor china electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, taken off unused 18” or 24” China Surroundings Compressor diameter TPI fans. Made to run an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring between your electric engine, capacitor and quickness control switch is still installed nevertheless the cord itself is generally detached as observed in the photos. (Find “Control Notice” below for modify type.)
T (See “Software Notice” below for make use of in a variety of other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft can be½” (0.500″) diameter x 2 ½” lengthy with a collection screw smooth. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually have got 4mm threads and to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric powered motor) is Clockwise.

Control Take note: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). Both of these types of switches both control the engine in the same way (but you possess a rotating knob and you have a pull-chain). In the event that you order several motor at a time, we will do our best to supply your purchase with each one kind of control or the additional.
Application Note: Do NOT use this electric engine in a nonfan app. This is a completely enclosed fan electric motor and made to have continuous ventilation over the motor casing for cooling. The housing isn’t vented and the electrical engine will overheat and get into automated thermal overload if operate in a nonfan plan where there isn’t strong ventilation past the electric motor. (Caution Note: the electrical motor will restart immediately when it cools back off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans could also overload the electric motor and lead it to proceed into automated thermal overload. (Your lover blade from another producer may possess a steeper blade angle.)
Origin: This electric motor is produced in China.

Tags: