Bonding best made in China – replacement parts – in Amsterdam Netherlands Mixer for Metallic Powder Coating with top quality

Bonding  best  made in China - replacement parts -  in Amsterdam Netherlands  Mixer for Metallic Powder Coating with top quality

We – EPG Team the largest gearbox & motors , torque limiter couplings and gears manufacturing facility in China with 5 various branches. For more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

one. Mixers:

1.1 Computerized Container Mixer

Automated container mixer is wor ept with steady substance trolleys, the container fills the supplies and lifted up and connnected tightly with mixing head instantly. The mixing head tilts jointly with the containers, and then receive the homogeneous mixing end result, right after finishing mixing as for every environment time, and return to first position, the total procedure will be controlled by PLC

Major Functions:

Many removable containers for circular operation
High performance
Adopting PLC to realize automation
Homogenized combination
No curing granule
Convenient for cleansing and upkeep
Risk-free and relaiable operation

Technological Data:

Model Volume (L) Output (kg/tank) Mixing Motor (kw) Tilting Motor (kw) Crushing Motor (kw) Mixing Time (min) Management Method General Proportions (MM)
FHJ-15 15 8 1.five     five-ten PLC  750*480*950
FHJ-a hundred and twenty 120 60 5.five .two   five-10 PLC  1800*1800*1950
FHJ-150  one hundred fifty 70 5.5 .37 2.2 5-ten PLC  2150*1100*2300 
FHJ-three hundred three hundred 150 15 3 2.two five-ten PLC  2150*1100*2300 
FHJ-600  600 300 22 four 4 five-10 PLC  2650*1250*2700 
FHJ-one thousand a thousand five hundred 30 four four 5-ten PLC  2900*1550*3100 
FHJ-2000  2000 a thousand forty five five.five five.5 five-10 PLC  3500*2350*3650 

1.2 High Speed Pre-Mixer:


Substantial effectiveness & straightforward operation

Simple shade altering, protected cleaning

Merged mixing & crushing as a single

Mixing time preseting, brief & homogeneous

Superb sealing, powder lea ept cost-free

Vertical or horizontal kind as optional

Complex Info:

Model Volume (L) Mixing Motor (kw) Crushing Motor (kw) Mixing Time (min) General Proportions (mm)
GHJ-20 20 .fifty five .37 3-five 700*500*800
GHJ-100 one hundred 3 one.five three-five 1000*600*900
GHJ-200 two hundred 5.5 three 3-5 1500*900*1400
GHJ-three hundred 300 7.5 4 three-6 1800*900*1400
GHJ-five hundred 500 15 5.5 four-6 1800*1300*1800
GHJ-800 800 eighteen.five 7.5 4-six 1900*1300*2000
GHJ-one thousand a thousand 22 seven.5 4-six 2300*1400*2000

one.3 Double Cone Mixer:

This twin-cone mixer is composed of a rotating container with two cones and two stirrers. This equipment is relevant for powder coating, pharmaceutical, chemical, foodstuff, dyestuff, and other multi-compound supplies. It has remarkable impact in mixing powders and particles with reasonably very good fluidity. Its barrel is produced of stainless metal, which is polished each inside and exterior, that includes stunning appearance and simple operation.

Specialized Data:

Model Quantity (L) Output (kg/tank) Rotating Motor (kw) Mixing Motor (kw) Mixing Time (min) General Proportions (mm)
SXH-100 300 a hundred and fifty 1.5 1.5 -thirty 1760*830*2030
SXH-two hundred four hundred 200 one.5 1.5 -thirty 1830*830*2150
SXH-three hundred 600 three hundred 2.two 1.five -30 1980*one thousand*2275
SXH-500 1000 five hundred 4 4 one-thirty 2630*1140*2620
SXH-1000 2000 one thousand five.5 5.5 -30 3060*1440*2860
SXH-1500 3000 1500 seven.five 7.5 -thirty 3700*2000*2970
SXH-2000 4000 2000 8.five 8.five -thirty 3800*2500*3500

2. Twin-Screw Extruder

2.1 High torque & Higher Pace Rotation Twin-Screw Extruder:

Principal Functions:

*Entire Gearbox from expert EPT maker, minimal sound, durable longevity

*Higher screw speed, high shearing, quick discharge

*Impartial lube oil cooling method layout

*Torque limiter to shield the travel prepare

*Suitable for reclaim powder, special powder generation

*Break up design and style of barrel and liner inserts for straightforward cleansing and maintainence

*Best & Aspect feeding options

*Other functions same as standard variety extruder

Specialized Parameters:

Model Capacity (kg/h) Screw Diameter (mm) Screw Length (mm) Screw Velocity (r/min) Principal Motor (kw) Feeder Motor (kw) Heating Electricity (kw) General Dimensions (mm)
TSX-40 eighty-260 40 16D -800 11/fifteen/18.5 .fifty five 8 1850*seven-hundred*1750
TSX-fifty two a hundred and fifty-450 52 16D -800 22/thirty/37 .75 10 2700*900*2200
TSX-65 400-1000 sixty five 16D -800 45/55/75 twelve 2900*one thousand*2400
TSX-seventy five 800-1200 75 16D -800 75/90 one.five 16 3100*1200*2500
TSX-85 1200-1800 eighty five 16D -800 90/one hundred ten 2.two 20 3700*1500*2900

2.2 Traditional Variety Co-Rotation Parallel Twin Screw Extruder


*Powerful shearing, easy cleaning

*Correct auto temperature management, higher cooling & heating exchagne

*Hinged clamshell kind barrel opening, segmented liners for straightforward replacing and cost preserving

*Feeder straightforward assembly & disassembly, interior structure to keep away from agglomeration

*Configurable screw used for defferent powder formulas

*Screw and barrel undertake specific supplies like Cr12MoV, CPM, and so forth., higher wearing resisting

*Really gearbox with minimal sound dB amount

*Torque limiter to safeguard the travel train

*Reduced energy usage

Technological Parameters:

Design Potential (kg/h) Screw Diameter (mm) Screw Size Screw Pace (r/min) Main Motor (kw) Feeder Motor (kw) Heating Power (kw) Overall Proportions (mm)
SLJ-forty 80-220 40 16D -five hundred eleven/15/eighteen.5 .55 four 1800*600*1700
SLJ-50 150-three hundred fifty 16D -five hundred 22/30 .75 8 2600*seven-hundred*2000
SLJ-55 three hundred-400 fifty five 16D -500 thirty/37 .75 8 2700*900*2300
SLJ-60 400-600 sixty 16D -500 45 12 2750*one thousand*2350
SLJ-seventy five 600-800 seventy five 16D -five hundred fifty five 1.5 twelve 2900*1100*2400
SLJ-80 800-1200 80 16D -500 seventy five/90 two.two 20 3700*800*2800

2.3 Lab Type Extruder

Specialized Parameters:

Design Potential (kg/h) Screw Diameter (mm) Screw Duration Screw Velocity (r/min) Principal Motor (kw) Feeder Motor (kw) Heating Power (kw) All round Proportions (mm)
TSX-20 .2-10 22 16D -600 two.2-four .1 2 1600*three hundred*850
SLJ-thirty 1-thirty thirty 16D -five hundred three-5.five .eighteen 3.2 1430*550*1300
SLJ-32 forty-eighty 32 16D -500 seven.5/11 .twenty five 3.two 1600*five hundred*1500

3 Cooling Belt

3.1 Drinking water Cooled Cooling Belt with Flaker:


Steady good quality imported metal belt

Base cooling water spraying program, set up heating and cooling gadget

Geared up with information unit to keep away from deforming

Much better cooling consequence, greater successful productiveness

Number of maintenance and effortless cleaning

Chips thickness and roller velocity adjustable

Crusher with finger pin and tooth type

Minimized cross contamination, basic operation

Complex Parameters:

Product Roller Dia. (mm) Belt Width (mm) Belt Duration (mm) Drive Motor (kw) Capability (kg/h) Cooling Method All round Dimensions (mm)
GDY-406 220 600 4000 1.5 two hundred-four hundred Cooled Drinking water 4000*750*1600
GDY-508 325 8When a torque overload occurs, the transmitted torque will exceed the set torque level of the Torque Limiter. When this happens, the frictional drive is no longer strong enough to transmit the torque from the driving shaft to the driven member, and the driven member slips amongst the friction disks. When the torque overload is taken off, the Torque Limiter immediately resets and resumes transmitting torque.00 5000 3 four hundred-five hundred Cooled Drinking water 5000*900*1800
GDY-510 325 1000 5000 3 500-seven hundred Cooled H2o 5000*1100*1900
GDY-610 440 a thousand 6000 four 600-800 Cooled Water 6000*1100*1900
GDY-612 440 1200 6000 4 seven-hundred-900 Cooled H2o 6000*1400*1900
GDY-712 600 a thousand 7000 5.five 900-1200 Cooled Water 7000*1400*2000

3.2 Air Cooled Sort Caterpillar Cooling Belt with Flaker:


Stainless metal manufactured caterpillar, air cooling

Flake chips thichness and conveying velocity adjustable

Affordable style for cooling rollers within, expert floor remedy to stay away from h2o lea ept and rust

Set up with simplified air conditioning device

Secure procedure, like crisis button, clockwise and counter-clockwise rotation.

Complex Parameters:

Model Roller Dia. (mm) Belt Width (mm) Belt Duration (mm)  Push Motor (kw) Blower Motor (kw) Potential (kg/h) Cooling Method Overall Dimensions (mm)
JFY-204  a hundred and sixty/a hundred and sixty 400 2000 .fifty five 200-400 30-100 Chilled Water&Air 2000*450*900
JFY-406 160/220 600 4000 .75 four hundred-500 a hundred-220 Chilled H2o&Air 4000*850*950
JFY-508 180/325 700 5000 .seventy five 500-700 220-four hundred Chilled Drinking water&Air 5000*1050*1200
JFY-510 180/325 800 5000 one.1 600-800 four hundred-500 Chilled H2o&Air 5000*1150*1200
JFY-610 one hundred eighty/325 800 6000 seven hundred-900 500-seven-hundred Chilled H2o&Air 6000*1150*1200
JFY-710 one hundred eighty/325 one thousand 6000 1.5 900-1200 600-900 Chilled Water&Air 7000*1250*1450
JFY-812 180/325 1000 7000 2.two 900-1200 900-1200 Chilled H2o&Air 8000*1650*1600

three.3 PU Type Air Cooled Cooling Belt


Adjustable thichness and roller velocity

Air cooled to steer clear of cross contamination

Roller and crusher geared up with overload security

Substantial efficiencies

One piece PU belt to faciliate easy cleansing and upkeep

Compact style for limited place

Technological Parameters:

Product Roll Dia. (mm) Band Width (mm) Band Length (mm) Motor Electrical power (kw) Throughput (kg/h) Dimensions (mm)
PFY-104 156 400 one thousand fifty a thousand*870*1050
PFY-206 220 600 2000 a hundred and fifty 2000*1150*1100
PFY-208 445 800 2000 two.two three hundred 2000*1100*1100
PFY-210 445 1000 2000 two.2 500 2000*1300*1100
PFY-310 622 one thousand 3000 two.2 800 2000*1300*1200

4 ACM (Air Classifier Mill) Grinding Program


Protection in accordance with EU explosion resistant standard ATEX/PSR11

Lower noise design and style (from mill to supporter program)

Particle dimension distribution adjustable on ask for

Mill physique temperature and air intake quantity monitoring

Rotary sieve with unique design and durable for mesh put on problem

Total grinding program created for powder dust free of charge

Concluded powder merchandise with more than ninety eight p.c

Higher output, straightforward procedure cleansing and routine maintenance

Technical Parameters:

Model Mill Motor kw Rotor rpm Classifier Motor Classifier rpm Fan kw Air cbm/h Capability kg/h All round dimensions mm
ACM-02 2.two 12000 .37 -3000 three 350 two-30 1430*550*1300
ACM-05 four 11000 .75 -3000 four 800 thirty-80 2100*a thousand*2150
ACM-ten seven.five 7000 one.5 -3000 11 2500 one hundred-260 6200*1250*3200
ACM-fifteen 11 7000 one.5 -3000 fifteen 3000 two hundred-350 6500*1300*3300
ACM-20 fifteen 6600 two.2 -3000 22 3500 300-four hundred 7500*1300*3600
ACM-30 22 5500 3 -3000 30 4500 four hundred-550 7900*1500*3600
ACM-forty thirty 4600 five.5 -3000 37 5500 600-800 8000*1700*3600
ACM-fifty 37 4000 seven.5 -3000 45 6500 a thousand-1200 9000*1900*3900
ACM-sixty 45 3500 seven.5 -3000 55 8000 1200-1600 9000*2000*4000


Xihu (West Lake) Dis.sunlight is a major manufacturer in China of Powder Coating Creation Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit thirty several years of ordeals in this ept and have exported to virtually thirty nations around the world and locations in the previous 10 years, and acquire commonly very good reputations.

We handed CE certification acceptance and ATEX explosion resistant take a look at, and many others. worldwide specifications, we do know how to fulfill the diversified and personalized manufactured requests of our buyers.

Our everlasting company philosophy: consistant good quality, effective interaction, responsible provider.

The use of unique equipment manufacturer’s (OEM) element figures or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our organization and the outlined substitution areas contained herein are not sponsored, authorized, or produced by the OEM.

Bonding  best  made in China - replacement parts -  in Amsterdam Netherlands  Mixer for Metallic Powder Coating with top quality

Bonding  best  made in China - replacement parts -  in Amsterdam Netherlands  Mixer for Metallic Powder Coating with top quality

Bonding  best  made in China - replacement parts -  in Amsterdam Netherlands  Mixer for Metallic Powder Coating with top quality