540 pto gearbox

pto gearbox

two) Loosen the bolts only when fitting the shafts. DO NOT take away the bolts entirely. If eliminated they may drop into the housing and result in a failure. The box must be disassembled to retrieve the bolts if this happens.

one) Tighten bolts to stay away from oil leaking during operation. (The bolts have a seal beneath their heads.)

Consider care when tightening the four x locking bolts inside of the housing. These bolts resolve the removable splined shafts in place.

Note: When fitting splined shafts.

Click on on drawing to enlarge.

one:1.85 speed increaser with thirteen/4″Z20 splined output shaft.

Located this short article on pto gearbox appealing then see our internet site for a lot more.